Corona treatment for woven sacks-PP/HDPE Woven sacks fabrics has to be corona treated before printing on flexographic printing machine.
Corona treater for woven fabrics-Corona treatment system is a very effective way to increase the surface tension of virtually any material. Surface treatment is required for plastic films/fabrics whose normal surface tension is not sufficiently high to permit good wetting by flexo graphic inks.
Mains Supply / Mains Frequency | 415 V AC , ± 5 % , 3 Phase,4 -Wire |
Treatment size | 600-1000 mm |
Line speed | 60-120 meter/min |
Material | PP / HDPE / Laminated Fabric |
Treating sides | Both side |
Input frequency | 50 Hz |
Output frequency | 20-50 KHZ |
Approx Output power (Kw) | 3 KW |
Maximum temperature | 0 ~ 50°C |
Blower | 3 H.P |
Treatment electrode | Multisegmented |
Dynes level | 38-42 Dynes/cm |
Length of HV cable | 2.5 Mtr |
Inverter | Ultra high frequency using latest IGBT technology |
Corona output | Constant at same speed No influence of supply voltage Accurate output power |
Certifications | CE, RoHs, ISO |